Technolec

AWK-1151C SERIES

Industrial 802.11a/b/g/n/ac wireless client, IP30, US band, 0 to 60°C operating temperature
awk-1151c-series
IEEE 802.11a/b/g/n/ac Wave 2 wireless client
Selectable dual-band Wi-Fi with data rates up to 867 Mbps
Latest WPA3 encryption for enhanced wireless network security
Universal (UN) models with configurable country or region code for more flexible deployment
Easy network setup with Network Address Translation (NAT)
Millisecond-level Client-based Turbo Roaming The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
Built-in 2.4 GHz and 5 GHz band pass filter for more reliable wireless connections
-40 to 75°C wide operating temperature range (-T models)
Integrated antenna isolation
Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards

WLAN Interface

  • WLAN Standards: 2.4 GHz: 802.11b/g/n with 256 QAM support5 GHz: 802.11a/n/ac Wave 2 with 256 QAM support
  • Frequency Band for US (20 MHz operating channels): DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  • Frequency Band for US (20 MHz operating channels): DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  • Frequency Band for US (20 MHz operating channels): 5.260 to 5.320 GHz (4 channels)
  • Frequency Band for US (20 MHz operating channels): DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  • Wireless Security: WPA/WPA2/WPA3-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES) WPA/WPA2/WPA3-Personal
  • Transmission Rate: 2.4 GHz:802.11b: 1 to 11 Mbps802.11g: 6 to 54 Mbps802.11n: 6.5 to 400 Mbps5 GHz:802.11a: 6 to 54 Mbps802.11n: 6.5 to 300 Mbps802.11ac: 6.5 to 867 Mbps
  • Transmitter Power for 802.11a (Dual Chain): 25±1.5 dBm @ 6 Mbps 23±1.5 dBm @ 54 Mbps
  • Transmitter Power for 802.11n (5 GHz, Dual Chain): 25±1.5 dBm @ MCS0 20 MHz 22±1.5 dBm @ MCS7 20 MHz 24±1.5 dBm @ MCS0 40 MHz 22±1.5 dBm @ MCS7 40 MHz
  • Transmitter Power for 802.11ac (Dual Chain): 25±1.5 dBm @ MCS0 20 MHz 22±1.5 dBm @ MCS8 20 MHz 24±1.5 dBm @ MCS0 40 MHz 21±1.5 dBm @ MCS9 40 MHz 23±1.5 dBm @ MCS0 80 MHz 20±1.5 dBm @ MCS9 80 MHz
  • Transmitter Power for 802.11b (Dual Chain): 29±1.5 dBm @ 1 Mbps 29±1.5 dBm @ 11 Mbps
  • Transmitter Power for 802.11g (Dual Chain): 29±1.5 dBm @ 6 Mbps 26±1.5 dBm @ 54 Mbps
  • Transmitter Power for 802.11n (2.4 GHz, Dual Chain): 28±1.5 dBm @ MCS0 20 MHz 25±1.5 dBm @ MCS7 20 MHz 28±1.5 dBm @ MCS0 40 MHz 25±1.5 dBm @ MCS7 40 MHz
  • Receiver Sensitivity for 802.11a (measured at 5.680 GHz): Typ. -89 @ 6 Mbps Typ. -72 @ 54 Mbps
  • Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz): Typ. -89 dBm @ MCS0 20 MHz Typ. -69 dBm @ MCS7 20 MHz Typ. -85 dBm @ MCS0 40 MHz Typ. -66 dBm @ MCS7 40 MHz
  • Receiver Sensitivity for 802.11ac: Typ. -88 dBm @ MCS0 20 MHz Typ. -65 dBm @ MCS8 20 MHz Typ. -85 dBm @ MCS0 40 MHz Typ. -60 dBm @ MCS9 40 MHz Typ. -81 dBm @ MCS0 80 MHz Typ. -55 dBm @ MCS9 80 MHz
  • Receiver Sensitivity for 802.11b (measured at 2.437 GHz): Typ. -96 dBm @ 1 Mbps Typ. -88 dBm @ 11 Mbps
  • Receiver Sensitivity for 802.11g (measured at 2.437 GHz): Typ. -90 dBm @ 6 Mbps Typ. -74 dBm @ 54 Mbps
  • Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz): Typ. -90 dBm @ MCS0 20 MHz Typ. -70 dBm @ MCS7 20 MHz Typ. -87 dBm @ MCS0 40 MHz Typ. -69 dBm @ MCS7 40 MHz
  • WLAN Operation Mode: Client Client-Router Slave Sniffer
  • Antenna: External, 2/2 dBi Omni-directional
  • Antenna Connectors: 2 RP-SMA female

Ethernet Interface

  • Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3az for Energy-Efficient Ethernet IEEE 802.1Q for VLAN Tagging IEEE 802.1X for authentication
  • 10/100/1000BaseT(X) Ports (RJ45 connector): 1

Ethernet Software Features

  • Management: DHCP Server DHCP Client DNS HTTP IPv4/IPv6 LLDP SMTP SNMPv1/v2c/v3 Syslog TCP/IP Telnet UDP VLAN MXconfig
  • Routing: Port forwarding Static Route NAT
  • Security: HTTPS/SSL RADIUS SSH Certificate Management
  • Time Management: SNTP Client

Firewall

  • Filter: ICMP MAC address IP protocol Port-based Client Isolation Wi-Fi ACL

Serial Interface

  • Console Port: RS-232 8-pin RJ45

USB Interface

  • Storage Port: USB Type A

LED Interface

  • LED Indicators: PWR, WLAN, SYSTEM

Input/Output Interface

  • Buttons: Reset button

Physical Characteristics

  • Housing: Metal
  • IP Rating: IP30
  • Dimensions: 100 x 130 x 22 mm (3.94 x 5.12 x 0.87 in)
  • Weight: 436 g (0.96 lb)
  • Installation: DIN-rail mounting Wall mounting (with optional kit)

Power Parameters

  • Input Current: 9 to 30 VDC, 1.57 to 0.47 A
  • Input Voltage: 9 to 30 VDC
  • Power Connector: 1 removable 3-contact terminal block(s)
  • Power Consumption: 14 W (max.)

Environmental Limits

  • Operating Temperature: -25 to 60°C (-13 to 140°F)
  • Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
  • Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications

  • EMC: EN 61000-6-2/-6-4 EN 55032/35
  • EMI: CISPR 32, FCC Part 15B Class A
  • EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V/m IEC 61000-4-8 PFMF: 30 A/m
  • Road Vehicles: E mark E1
  • Safety: IEC 60950-1 IEC 62368-1 UL 62368-1
  • Vibration: IEC 60068-2-6
  • Radio: EN 300 328, EN 301 489-1/17, EN 301 893, ANATEL, FCC, MIC, NCC, RCM, SRRC, WPC, KC, NBTC, IC
  • Industrial Cybersecurity: IEC 62443-4-1 IEC 62443-4-2

MTBF

  • Time: 1,144,888 hrs
  • Standards: Telcordia SR332

Warranty

  • Warranty Period: 5 years
  • Details: See www.moxa.com/warranty

Available Models

Model No. Description Quantity
AWK-1151C-UN Industrial 802.11a/b/g/n/ac wireless client, IP30, universal band, 0 to 60°C operating temperature
AWK-1151C-UN-T Industrial 802.11a/b/g/n/ac wireless client, IP30, universal band, -40 to 75°C operating temperature
AWK-1151C-US-T Industrial 802.11a/b/g/n/ac wireless client, IP30, US band, -40 to 75°C operating temperature
AWK-1151C-US Industrial 802.11a/b/g/n/ac wireless client, IP30, US band, 0 to 60°C operating temperature