MRX-G4064 SERIES
Layer 3 modular managed Gigabit Ethernet switch with 3 slots for 16-port Gigabit Ethernet modules, 8 10GbE SFP+ slots, 2 isolated power supplies (90 to 264 VAC), -10 to 60°C operating temperature
8 10GbE Ethernet ports
Up to 56 1GbE ports or SFP slots
HAST (High-availability Static Trunk) technology supports backbone reliability
Onboard LCM display for at-a-glance status updates supports easy on-site maintenance and operation
Dual power modules and 6+2 fan redundancy design for non-stop network operations
Real-time system temperature monitoring to protect network and devices
Up to 56 1GbE ports or SFP slots
HAST (High-availability Static Trunk) technology supports backbone reliability
Onboard LCM display for at-a-glance status updates supports easy on-site maintenance and operation
Dual power modules and 6+2 fan redundancy design for non-stop network operations
Real-time system temperature monitoring to protect network and devices
Ethernet Interface
- 1000/2500/10000BaseSFP Ports: 8
- 1000BaseSFP Slots: 8
- Out-of-band Management (OOBM): 1 x 8-pin RJ45 1GbE Ethernet port (MGMT)
- Module: There are 3 module slots on the switch. Users can select different types of modules to insert into the switch. The modules that can be selected include 16-port modules with 1000BaseT(X) or 1000BaseSFP interfaces.Refer to Expansion Modules in the Accessories section for a full list of supported interface modules.
- Standards: IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1X for Authentication IEEE 802.3ab for 1000BaseT(X) IEEE 802.3ad for Port Trunk with LACP IEEE 802.3x for Flow Control IEEE 802.3z for 1000BaseSX/LX/LHX/ZX IEEE 802.3ae for 10 Gigabit Ethernet IEEE 802.3az for Energy-Efficient Ethernet ITU-T G.8032 Ethernet Ring Protection Switching
Ethernet Software Features
- Management: IPv4 Flow control Back Pressure Flow Control DHCP Client ARP RARP LLDP Linkup Delay SMTP SNMP Trap SNMP Inform SNMPv1/v2c/v3 RMON TFTP SFTP HTTP HTTPS Telnet Syslog Private MIB Port Mirroring (SPAN, RSPAN)
- Filter: GMRP GVRP GARP 802.1Q IGMP Snooping v1/v2/v3 IGMP Querier
- Redundancy Protocols: STP RSTP Turbo Ring v2 Ring Coupling Multiple Dual-Homing Link Aggregation Network Loop Protection MSTP
- Routing Redundancy: VRRP
- Security: Broadcast storm protection Rate Limit Access control list Static port lock Sticky MAC HTTPS/SSL SSH RADIUS TACACS+ Login and password policy Secure Boot
- Time Management: SNTP IEEE 1588v2 PTP (hardware-based) NTP Server/Client NTP Authentication
- Protocols: TCP/IP UDP ICMP ARP RARP TFTP DNS NTP Client DHCP Client 802.1X QoS HTTPS HTTP Telnet SMTP SNMPv1/v2c/v3 IPv4 RMON Syslog
- Unicast Routing: OSPF Static Route
- MIB: P-BRIDGE MIB Q-BRIDGE MIB IEEE8021-SPANNING-TREE-MIB IEEE8021-PAE-MIB IEEE8023-LAG-MIB LLDP-EXT-DOT1-MIB LLDP-EXT-DOT3-MIB SNMPv2-MIB RMON MIB Groups 1, 2, 3, 9
Switch Properties
- MAC Table Size: 32 K
- Max. No. of VLANs: 512
- IGMP Groups: 1500
- Jumbo Frame Size: 9.6 KB
- Packet Buffer Size: 6 MB
- Priority Queues: 8
- VLAN ID Range: VID 1 to 4094
USB Interface
- Storage Port: USB Type A
MicroSD Interface
- Storage Port: microSD card
Serial Interface
- Console Port: RS-232 (RJ45)
Input/Output Interface
- Alarm Contact Channels: 1 relay output with current carrying capacity of 2 A @ 30 VDC
Power Parameters
- Input Voltage: 100-240 VAC, 50-60 Hz or 230-240 VDC (for each power supply)
- Operating Voltage: 90-264 VAC, 47-63 Hz or 180-300 VDC (for each power supply)
- Overload Current Protection: Supported
- Reverse Polarity Protection: Supported
- Input Current: Max. 1.236 A @ 110 VACMax. 0.675 A @ 220 VACMax. 0.74 A @ 180 VDCMax. 0.439 A @ 300 VDC
- Power Consumption (Max.): Max. 134.2 W @ 110 VACMax. 132.3 W @ 220 VACMax. 133.2 W @ 180 VDCMax. 131.8 W @ 300 VDCNote: These are the maximum power consumption ratings for the device with the maximum number of modules installed.
- Power Module: 2 x slots (2 x PWR-300-HVA-IF power modules included)
Physical Characteristics
- IP Rating: IP30
- Dimensions: 440 x 88 x 420 mm (17.32 x 3.46 x 16.54 in)
- Weight: 12 kg (26 lb)
- Fan Module: 8 x slots (8 x XM-4000-FAN-R preinstalled)
- Installation: Rack mounting
- Interactive Interface: Onboard LCM display Push buttons for configuration
Environmental Limits
- Operating Temperature: -10 to 60°C (-14 to 140°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
- Safety: UL 62368-1 UL 61010-2-201 IEC 62368-1
- EMC: EN 55032/35 EN 61000-6-2/-6-4
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF IEC 61000-4-11 Voltage Dips & Interruptions
- Railway: EN 50121-4
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6
- Package Drop Test: ISTA 1A
- Package Vibration Test: ISTA 1A
MTBF
- Time: 1,337,959 hrs
- Standards: Telcordia (Bellcore), GB
Warranty
- Warranty Period: 5 years
- Details: See www.moxa.com/warranty