VPORT 461A SERIES
Full Motion, 1-ch industrial video encoder, 2 10/100BaseT(X) Ethernet ports, -25 to 60°C operating temperature
Supports up to 4 video streams simultaneously for H.264 and MJPEG
Up to Full D1 resolution (720 x 480) @ 90 fps for 3 video streams with legacy analog video images
Video latency under 200 ms
2 Ethernet ports for cascading or Ethernet port redundancy
DynaStream™ for optimized network efficiency
ONVIF support for standardization and interoperability
Local storage capability with SD card slot
Industrial design with -40 to 75°C operating temperature range
Up to Full D1 resolution (720 x 480) @ 90 fps for 3 video streams with legacy analog video images
Video latency under 200 ms
2 Ethernet ports for cascading or Ethernet port redundancy
DynaStream™ for optimized network efficiency
ONVIF support for standardization and interoperability
Local storage capability with SD card slot
Industrial design with -40 to 75°C operating temperature range
Memory
- SD Slot: SDXC
Input/Output Interface
- Digital Input Channels: 2
- Digital Inputs: +13 to +30 V for state 1 -30 to +1 V for state 0 Max. input current: 8 mA
- Relay Channels: 2
- Contact Current Rating: Resistive load: 1 A @ 24 VDC
- Connector: Terminal block
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector): 2
Ethernet Software Features
- Protocols: TCP/IP IPv4/IPv6 UDP HTTP RTP/RTSP ARP UPnP FTP TFTP NTP Client DNS QoS IGMP v3 ICMP SNMPv1/v2c/v3 Modbus TCP HTTPS 802.1X NTCIP
Security Functions
- Password: User-level password protection
- Filter: IP address
- Authentication: 802.1X
- Encryption: HTTPS SSH
LED Interface
- LED Indicators: STAT: Indicates if system is booted up properly or not Power 1: Power 1 on/off Power 2: Power 2 on/off FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network Video: Video input signal PTZ: Indicates if PTZ or COM port data has been transmitted SD: Indicates if SD card was mounted successfully Network: 10 Mbps or 100 Mbps
Serial Interface
- PTZ Port: 1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
- COM Port: 1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps
- Console Port: 1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)
Power Parameters
- No. of Power Inputs: 2
- Input Voltage: Redundant dual inputs
- Operating Voltage: 12 to 32 VDC, 18 to 30 VAC
- Input Current: 0.64 A @ 12 VDC, 0.18 A @ 32 VDC 0.59 A @ 18 VAC 0.35 A @ 30 VAC
- Power Connector: 2-pin terminal block
Video Interface
- Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG
- Video Input: 1, BNC connector (1.0 Vpp, 75 ohm)
- Video Output: via Ethernet
- Video Streams: 4 independent H.264 or MJPEG video streams
- NTSC/PAL: Auto-sensing or manual
- Video Resolution and FPS (frames per second): 25
- Video Resolution and FPS (frames per second): NTSC
- Video Resolution and FPS (frames per second): PAL
- Video Resolution and FPS (frames per second): Size
- Video Resolution and FPS (frames per second): Max. FPS
- Video Resolution and FPS (frames per second): Size
- Video Resolution and FPS (frames per second): Max. FPS
- Video Resolution and FPS (frames per second): QCIF
- Video Resolution and FPS (frames per second): 176 x 112
- Video Resolution and FPS (frames per second): 30
- Video Resolution and FPS (frames per second): 176 x 144
- Video Resolution and FPS (frames per second): 25
- Video Resolution and FPS (frames per second): CIF
- Video Resolution and FPS (frames per second): 352 x 240
- Video Resolution and FPS (frames per second): 30
- Video Resolution and FPS (frames per second): 352 x 288
- Video Resolution and FPS (frames per second): 25
- Video Resolution and FPS (frames per second): VGA
- Video Resolution and FPS (frames per second): 640 x 480
- Video Resolution and FPS (frames per second): 30
- Video Resolution and FPS (frames per second): 640 x 480
- Video Resolution and FPS (frames per second): 25
- Video Resolution and FPS (frames per second): 4CIF
- Video Resolution and FPS (frames per second): 704 x 480
- Video Resolution and FPS (frames per second): 30
- Video Resolution and FPS (frames per second): 704 x 576
- Video Resolution and FPS (frames per second): 25
- Video Resolution and FPS (frames per second): Full D1
- Video Resolution and FPS (frames per second): 720 x 480
- Video Resolution and FPS (frames per second): 30
- Video Resolution and FPS (frames per second): 720 x 576
- Video Resolution and FPS (frames per second): 25
- Video Viewing: DynaStream™ support for changing the video frame rate automatically CBR Pro™ for good image quality in limited bandwidth transmissions Adjustable image size and quality Timestamp and text overlay OSD (On Screen Display) position adjustable Image tuning: control brightness, contrast, saturation Maximum of 10 simultaneous unicast connections, 50 multicast clients
Audio Interface
- Audio Inputs: 1 Line-in or MIC-in with 3.5 mm phone jack
- Audio Outputs: 1 Line-out, with 3.5 mm phone jack
- Audio Format: Mono, PCM (G.711)
Camera Software Development
- VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers
- Video Standards: ONVIF Profile S
Camera PAN/TILT/ZOOM
- PTZ Camera Control: Via PTZ port or COM port
- PTZ Control Functions: Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions)
- PTZ Function Updates: Driver upload supported
- Protocols: Pelco D, Pelco P, Custom Camera
Camera Alarm Software Features
- Intelligent Video: Camera tampering detection
- Video Motion Detection: 3 independently configurable areas
- Scheduling: Daily repeat timing schedule
- Imaging: JPEG snapshots for pre/trigger/post alarm images
- Custom Alarms: HTTP event servers for setting customized alarm actions
- Email/FTP Messaging: Automatic transfer of stored images via email or FTP as event-triggered actions
- Pre-Alarm Buffer: 50 MB video buffer for JPEG snapshot images
- Video Recording: Event recordings stored on the SD card
- FTP Messaging: Automatic transfer of stored images via FTP as event-triggered actions
Software Requirements
- Memory Size: 1 GB
- Operating System: Windows 7 or above
- Browser: Internet Explorer 9.x or above
- Multimedia: DirectX 9.0C or above
Physical Characteristics
- Housing: Metal
- Dimensions: 46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
- Weight: 710 g (1.57 lb)
- Installation: DIN-rail mounting Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature: -25 to 60°C (-13 to 140°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)
- Altitude: 2000 m
Standards and Certifications
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
- Freefall: IEC 60068-2-31
- Safety: UL 60950-1
- Shock: IEC 60068-2-27
- Traffic Control: NEMA TS2
- Vibration: IEC 60068-2-6
MTBF
- Time: 862,568 hrs
- Standards: Telcordia SR332
Warranty
- Warranty Period: 5 years
- Details: See www.moxa.com/warranty